Digital Pulse Train with Frequency Update using Event Structure

[Pcorcs]

Overview
The example is to demonstrate how to insert the frequency parameters while the VI is already running

Description:
Using the event structure, the VI would work to generate a pulse train signal with a pre defined frequency and would change the output's frequency as soon as the user change the parameters while the VI is running

Steps to Implement or Execute Code:

To implement this example:

1. Define the Output Physical Channel
2. Set the value of the parameters as needed
3. Run the VI
4. (Optional) Turn on the Highlight Execution to see the flow of the VI

To execute this example:

1. Install the required software.
2. Connect the DAQ hardware that supports the Counter features
3. Confirm the connection with the MAX with TestPanel
4. Open the VI and refer the Implement Steps

Requirements
Software
LabVIEW 2012 or compatible
NI-DAQmx 16.0 or compatible

Hardware
cDAQ with C series Counter Output Module

**This document has been updated to meet the current required format for the NI Code Exchange.**