Where is FieldPoint 4.1 driver?

[Ching_F.]

Have you tried turning off your firewall?  Windows often blocks the IP address 0.0.0.0.  Also, I would recommend connecting the controller via crossover cable.  If you have questions about this, please refer to this document.

[klivecche]

My firewall has always been turned off and I have been using a crossover cable.  The only thing that changed was me deleting the files on the controller.

[Ching_F.]

If you have tried everything in the KnowledgeBases that I have pointed you to, this may be most easily resolved by speaking with an Applications Engineer.  I would recommend creating a service request at www.ni.com/ask, and contacting an Applications Engineer over the phone to troubleshoot further.

[Ching_F.]

If you have tried everything in the KnowledgeBases that I have pointed you to, this may be most easily resolved by speaking with an Applications Engineer.  I would recommend creating a service request at www.ni.com/ask, and contacting an Applications Engineer over the phone to troubleshoot further.

[klivecche]

Thank you Ching for all your help! 🙂