DSO5012A scope. IVI driver. Trigger source name in labview

[NathanT]

Hello Unai,

       I am very happy to hear that it works well when you use the native IVI-C Specific driver that is NI-Supported.  One way of determining if a driver has an IVI-C wrapper is by looking at the Software Module.  Only IVI-COM drivers have the Prog ID field populated.  The Module Path field is used for IVI-C.  If both fields are populated, than the driver is most likely an IVI-COM driver with an IVI-C wrapper. 

All of the NI-Supported IVI drivers available on IDNet are native IVI-C, so I recommend that you check there first for instrument drivers.

Cheers,

NathanT

[UnaiDeusto]

NatthanT,  thaks for the information and the support!

I realized that most of the drivers that I am using are not native IVI-C drivers.

Best regards!!