Help me, Used Modbus in Touch Panel Module with Windows CE 5.0

[WHC]

'm using the Labview 8.6 & 2009 Touch Panel Module.

I want to use Modbus Library.

Master example is ok.

But 'MB Serial Slave Demon.vi' is error in Touch Panel Module at Windows CE5.0.

The red circle is error.

That doesn't support in Touch Panel Module at Windows CE 5.0

Second error is below.

in detail, The icon dosen't run.

How can I use the modbus library in winodws ce5.0?

[Jaidev]

Hi WHC,

The Modbus library was written for LabVIEW Desktop, as such it contains many functions that are not supported on embedded targets such as LabVIEW Touch Panels. Your best option might be to create Modbus VIs for your own use. 

If Modbus functionality is critical to your application, I would recommend the NI TPC-2515D or the NI TPC-2512D touchpanels. They are XP Embedded touchpanels and include a license for the NI LabVIEW Datalogging and Supervisory Control Module which includes modbus functionality. You can refer to the LabVIEW DSC module help, here to search for all the modbus features available in the module.

Hope this helps,

Thank you,

Jaidev Amrite

[BZH34]

Morning

I am facing the same problem than you , Do you find anysolution to be able to use Modbus Demon With Touch Panel 5.0

Thanks for your help

Regards