How do you use an AT-GPIB/TNT card with Labview 8.0 (Run-Time Engine)

[Syzygy]

I have a relatively slow instrument control application (responce times of 200ms acceptable) so want to use older hardware that I have for this.  Wanting to run the application on an old PC using the run time engine.  The application works with GPIB-USB-B so am assuming my only problems are with the driver for the AT-GPIB/TNT card.  [link removed] says that driver 1.70 is required but [link removed] says that the driver is no longer availble for down load and refferes me back to the previous page (unfortunately I cannot find my old drivers at the moment).  With latest drivers one of the AT-GPIB/TNT cards is recognised by MAX but will not talk to insruments and the other (slightly older version has jumper links for IRQ...) is not recognised by MAX.  Suggestions please.

[LoganS]

You can still get the 1.7 driver, but as it says in the product page that you reference, you need to "e-mail gpibpse@ni.com with the part number (sometimes abbreviated "Assy number") and serial number of the hardware you are using, along with your operating system and a brief explanation of what is needed."  If you do that you should be in good shape, at least as far as the driver is concerned.

Logan S.

[Syzygy]

Oops stopped reading too soon.  Many thanks.