回應： Kenwood PA18-3A Power Suppy Driver/ Programming Manual required

[Nikita_Jain]

Hi, I would like to do remote programming using GPIB for the Kenwood PA18-3A Power supply.

Does anyone have a base driver / programming manual for this Instrument ?

Manufacturer - Texio Corporation [Japan, formerly known as Kenwood]

Kenwood Model # PA18-3A
Output Voltage: 0 to 18V
Output: 0 to 3A
Voltage Regulation: 3mV
Ripple Peak: 0.5mV RMS
Current Regulation: 10mA
Ripple/Noise: 1mA RMS
104 x 147 x 224 (WHD) 5.6 kg

Any help will be greatly appreciated.

Thanks,

Nikita

[yytseng]

http://www.texio.co.jp/jp/pdf/GP-600B_B68_J.pdf

[Nikita_Jain]

Dear yytseng,

Thankyou for your response, greatly appreciate the help.

I do not understand Japanese, can you please forward the link to an english version of the manual.

Thanks,

Nikita

[yytseng · Accepted solution]

http://www.texio.co.jp/en/pdf/GP600B_m_e.pdf

[Nikita_Jain]

Dear yytseng,

Thankyou for sharing the link.

I noticed that this document is relevant to the PA-B series. I am using an instrument from the PA-A series (PA18-3A). Please let me know if you have any information on whether this command set would support instruments ine PA-A series.

Thanks,

Nikita

[yytseng]

As I know, there have no difference.

[Nikita_Jain]

Thankyou yytseng

Regards,

Nikita