Hi,
I configured the 7210 as active system controller. Now i need to address the gpib device to make it listener and send the gpib commands to it. Acording to the manual of 7210, I need to address the device first by sending the addressing commands MTA and MLA. I think i can send the device address by sending MLA command and making it listener. But how can the device know that 7210 is the talker and its address (plus system controller)??. I have chosen the primary dual addressing mode by writing 0x31 to ADMR and 0x00 to ADR0 in 7210 initialization. Can i use MTA command ( sending MTA0 to the device) to to configure 7210 as talker?
Is it correct to follow the below sequence to address the 7210 as talker and gpib device the listener?
1. configure 7210 as active system controller
2. send UNT ; send untalk command to make the device the listener
2. Send MLA5 // addressing device as the listener with address 5
3. Sending MTA0 // addressing 7210 as the talker with the address 0
4. making 7210 to go to standby controller state
5. send GPIB commands
please help me to configure 7210 as talker correctly?
