UNO-2050CE-GDA1 with labview

[homeauto]

hi folks,

just wondering if its possible to use UNO-2050CE-GDA1 hardware connected to pc(or its come with windows CE 4.2) by labview and use all the i/o port from UNO-2050CE-GDA1 to make a control system as a plc.

here is the data sheet http://www.delvingware.com/webservices/medialibrary/media/datasheets/UNO-2050CE-GDA1.pdf

if anybody know anything about this hardware, will you please help me out here?

thanks in advance.

[homeauto]

anybody?

can i use modbus tcp/ip protocol? can i use visa?

[homeauto]

helllo again,

i seriously need some help to make a exe file in windows ce 5 platform to control this hardware DI/O.

this hardware comes with Example of C, C#, VB6 and VB.NET.

also there is SDK for this product.

now i want to make a simple exe vi which i can run on this windows ce to control the DI/O.

after lots of reading i found lots of way to do it.

inline C command

driver wrapper....

can you please recommand me one which is easy and suit all my need before i look into deep.

thanks

[Matt.S]

Hi homeauto,

Labveiw .exe's are supported on windows CE I would suggest using the inline C command as a good option if you are familliar with C coding.  If you want to create a custome driver for the UNO-2050CE-GDA1 then here are is a link about driver creation.

http://digital.ni.com/public.nsf/allkb/796F187241DF36D1862576F20059366D?OpenDocument

[Matt.S]

This may also be of interest.

http://digital.ni.com/public.nsf/allkb/E3485A8B93929DAC862572D6005240EF?OpenDocument