VISA error: Use the VISA to initialize the 61604(ac source) 1073807343 error code

[小桂子]

Dear everyone:

      I have the problem of initailize the 61604 (ac source) by VISA . The error code picture as below.

---first, I can see the instrument 61604 on the MAX , and I can communicate with instrument by MAX. I sent *IND string to 61604 ,then MAX can Received the string like ''chroma ATE,61604,001634,1,25,1.34,1.20........So Can I ensure the 61604 communicate with MAX well?

---second, I see the VISA name of 61604 instrument is "61604_1" the same as the INITANILIZE.vi.pls see the picutre as attached.

    So what confused me is that 61604 can communicat with MAX , and the instrument VISA name in the INITANILIZE.vi is the same as MAX. 

   Why always error????

[小桂子]

Also I can open the VISA test panel ...picture as below

[小桂子]

Update the picture of error

[Dennis_Knutson]

That's an error from an IVI function. Did you define the IVI setup in MAX?

[小桂子]

Dear Dennis:

     Thank you for U reply so soon! This is a error I first met.I don't know how to define the IVI funtion setup in MAX.Can U tell me how to do it .but I think I had done IVI funtion setup..pls refer to below picture.

     second, I want to said is this initianlize.vi that I can run in the tester yesterday.But today I power the PC and find this error.

  Thanks!

[Dennis_Knutson]

When you open MAX, you should plainly see a link to configure an IVI driver.

[小桂子]

Hello:

    Thanks very much! But can I confirm that the IVI dirver is ok, what I need to do  just setup the IVI in Max.

[小桂子]

Dear Dennis,

   I found the 61604 IVI setup in Max.(refer to picture). But I find the boot of the error. In Initialize.vi ,I put into the name is 61604_1, however , I refresh the resource name which show instrument name is GPIB::.....NOT 61604_1.

   So, how can I make instrument show 61604_1 in the resource name?

[小桂子]

Hi:

    U re right...The IVI dirver setup is empty.  Is that the reason????

[Dennis_Knutson]

It is the logical name that is used with IVI as you can see in the initialize function. Why are you looking under driver sessions?