how can i connect to fluke 199B?

[Cordero]

i am trying to connect to fluke 199B Scopemeter, i installed the drivers to use the OC4USB cable's com port and the drivers of the instrument. when i connect the fluke to the usb port, the instrument is detected and i verified this in the MAX software and the communication port is ready to use.

but when i try to run a self test with Labview 9.0 appear a mistake error;

ASLR1::INSTR

Return status code: 0xBFFF0072

status name: VI_ERROR_RSRC_BUSY

after that, i close all communication ports to work only with the OC4USB but i do not have change.

i do not know if the instrument drivers be compatibles, because i installed the instrument drivers to use with Labview 8.0 version and i am running with Labview 9.0.

everybody that have an idea of my problem?

thanks and i hope your assistance.

[Albert.Geven]

Hi

The LabVIEW version is not a problem. but it looks if this is a msg from the instrument or the usb port is blocked by another program.

Maybe a testprogram you are also running?

[Cordero]

Thanks Albert,

I checked and disable all the USB ports that was not in use. I tried again, and when run the application not appear error in the VI application. I do not know what is append.

I don't have answer of the instrument, and any changes are visible in display.

What do you recommend, that I must to do.

Thanks for all..And sorry for don't answer soon...

Greetings...

[Albert.Geven]

Hi

According the serial port you use, did you try to communicate with hyperterminal or inside max?

Did you also dowwnload the istrumentdriver from IDN?

http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=668

this is the C version but probably compatible.