Agilent 5519A or 5529A driver

[Anonymous]

I am in need of a driver for the hp/agilent 5519/5529 distance
measureing interferometer. I just need to send the final data to
another computer.(easy)
I am trying to create a master program to get data off of muliple
machines with various types of data.
I think using a tcp connection is best, but I could use a seirel port.

[Anonymous]

Hello,

Although we do not have a driver for the Agilent 5519A or 5529A
driver, you can submit a request for an instrument driver through our
request database at:
http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/. Your request
may be considered for development. We try to develop instrument
drivers according to popularity. Unfortunately, we cannot develop
instrument drivers for all the requests we receive.

If you would like to try developing your own instrument driver, we
have documentation, model instrument drivers, and driver templates to
help you in your development. You can find this information on our
web site: http://www.ni.com/devzone/idnet/development.htm.

For further questions, please email instrument.driver@ni.com

Regards,

Katie Rollo
Nat
ional Instruments

[jpogge]

I also have a need for this driver for the SNS metrology lab...

[dar0n]

Hi all

I wrote a driver for the Agilent 55292A USB-Box working with LabView. So if you have the Agilent Calibrator Board 10887B and the Compensation Board 10886A mounted into the USB box, I have just what you need. If you prefer not to work with LabView, I have a software working with the USB-Box written in C++. The communication possibilities with this software are RS232 and WinDDE for now. In other words you can retreive the measured distance value and all the sensor values of the compensation board. Of course other functionalities could be added.

For more information go to http://kaempfer.homelinux.org or contact me at  remo.kaempfer@gmx.ch

[Remo Kaempfer]

The LabView driver for Agilent 55292A USB-Box is now available under www.calame-metrologie.ch

Direct Link to the driver: LabView driver for the Agilent 55292A Calibration System

For more information: remo.kaempfer@calame-metrologie.ch

[Dennis_Knutson]

Advertising products for sale here is violation of the Terms of Use (see bottom of page). I would suggest you investigate the LabVIEW Tools Network.