Computer Randomly Reboots - Nidmmk.dll?

[HeatherBaker]

Please generate a MAX report as mentioned in the previous post.  What are drivers are you calling in your code?  Try running a regular DMM shipping example and see if the computer crashes and repeat with a PXI 4351 example.  Is the process described above the only way you receive the blue screen? 

[hbaugh]

The attached zip file is a MAX report using file->create report->technical support with a .vi and .dmp files attached.  Is there a different kind of report you are looking for?

The AcquireThermistors2.vi is a slight variation of the NI supplied 4351 example, tailored to the thermistors in my setup.

Were you able to reproduce the blue screen with the steps in the post?

Hugh

[HeatherBaker]

Hi Hugh,

It do not think that your attachment made it to the reply.  Also, are you able to run any 4351 unmodified examples without any errors?

[antonelli7]

I'm back and so is my same issue.  Nidmmk.dll causing random reboots.  System is XP SP2.  Labview 8.0, License Mngr 3.1, Teststand 3.5.

I don't use this software but have been asked to fix.  I would like to load the latest version of the Nidaq driver (previously mentioned) but have no idea if I should download the legacy driver I found or something different.  Can you tell me what is the latest version I need and possibly provide me the link so I can go directly to it so I don't choose the wrong update?

Message Edited by antonelli7 on 12-16-2009 06:33 PM

[Ben_S]

antonelli7,

DAQmx 9.0.2 is the newest DAQmx drivers and DAQ 7.4.4 is the newest legacy driver. I would install the DAQmx drivers.

[Josh_B1]

Hi sszewczyk,

Can you provide some detailed information on the problem you are experiencing. On page one of this forum Hugh was able to find a very specific set of steps to reproduce the crash. Can you try and find a reproducible set of steps for your issue? What version of LabVIEW are you using?

Regards,

Josh B