Error 10845 in VI Logger with NI 4350

[MDH]

I have just installed VI Logger 2.0 full version for use with my NI 4350 USB box. I get an error in a simple analog read of 10845, Data could not be read from my devvice fast enough. Is there a wy to slow down the sampling or speed up the bus speed? Thanks

[Ayman K]

MDH,

What is the frequency of the signal you are acquiring? How fast are you actually accumlating the signal in your DAQPad? The reason I am asking is because the transfer rate is basically the USB rate and this should not be an issue. Could you please tell me whether you are running in a finite acquisition mode or continuous. In case you are running finite, what is the number of scans specified for the channel? I await your response.

Ayman K

[MDH]

Thanks for the feedback. I've just discovered that the error only occurs when I try to extend the real time graph out more than 5 minutes in a screen with the help on the right and about 9 minutes when I extend the chart screen out after closing the help. Since the 4350 requires the Nidaq traditional. I'm not able to control the sample rate. Its greyed out at 60.00 sample/sec.

Thanks