Would anyone possibly know how to convert a tool developed in vision builder for automated inspection into labview so that when we connect a thermal camera and have a live image, the tool from vision builder analyses the image on labview?
from VBAI, select Tools >> Migrate inspection to LabVIEW, I *think*, you can only do this if you have VDM and VBAI Dev Toolkit activated, not sure though.
We have two ears and one mouth so that we can listen twice as much as we speak.
Yes I have managed this far, but when you actually get the tool onto labview, on the block diagram, where the image analysis says like "find edges" or "gray scale color" you only get question marks on the controls... And none of the steps of vision builder work then.
it all works for me... launch your NI licence manager and check that you have Vision Acquisition Software and Vision Development module installed and activated.
We have two ears and one mouth so that we can listen twice as much as we speak.
just a little question, do you have like a video imaging or something similar and you can get data from the tool developed in vision Builder? like temperature or just any feature from VB AI?
well I have a live image from a thermal camera basically on Labview, and I was wondering if the tools developed in VB AI like for example analysing (from a picture) temperature or finding edges... could apply to this live image on Labview? Of course when I would transform the tool from VB to Labview.
