I need to control a web browser from LabVIEW

[Shadowfeld]

I have a customer who wants an application that does the following:

1. Requires the operator to enter in a serial number (SN) of the product under test.
• This is Finished
2. Check a database to confirm that the SN has passed all required tests.
• This is Finished
3. Open up internet explorer to the portal or control the portal from within LabVIEW.
• This is Finished, I can handle it two ways either use a batch file to open up windows explorer or use SHDocVw.IWedBrowser2 to access it.
4. Automatically enter in the SN and only that SN in to the portal.
• This is where I am lost
5. After 90 seconds close out the window and display a timeout.
• This is Finished

This program is 85% complete, but I am quite lost on this. Can anyone give me some pointers?

[udka]

Check if it helps : Taking Your Measurements to the Web with LabVIEW : http://www.ni.com/white-paper/2911/en/ 

[Hatef.fouladi · Accepted solution]

may be it could help you to find answer faster
https://decibel.ni.com/content/docs/DOC-4494#comment-18380