Is there is current limit on the NI USB module 9263 Analog Voltage Out (+/-10V)?

[NIquist]

There. 😇  Now I suppose you want an op-amp circuit???  🙄

[oxsanj1]

Hi NIquist,

Thank you for these circuit diagrams. I am using NI9263 output analog DC (3V, 1mA) to drive a vibrator which needs 3VDC and 85mA. The terminal resistance of the vibrator is 30 Ohm. I can power the Transistor (2N222xx with a beta of 85) with an external power source (3V 600 mA)  What resistances would I need to comply with the circuit diagram, please?

Thanks

Oxsanj

[crossrulz]

---

@NIquist wrote:

Now I suppose you want an op-amp circuit???  🙄

---

That's what I was going to suggest. A simple voltage follower can do the job.

[Henrik_Volkers]

---

@NIquist wrote:

There. 😇  Now I suppose you want an op-amp circuit???  🙄

---

Why resistors ? 😄

OK, a OP has no voltage drop but ...

[Henrik_Volkers]

---

@oxsanj1 wrote:

Hi NIquist,

Thank you for these circuit diagrams. I am using NI9263 output analog DC (3V, 1mA) to drive a vibrator which needs 3VDC and 85mA. The terminal resistance of the vibrator is 30 Ohm. I can power the Transistor (2N222xx with a beta of 85) with an external power source (3V 600 mA)  What resistances would I need to comply with the circuit diagram, please?

Thanks

Oxsanj

---

If you just want ON/OFF just use one transistor E to GND (of PS and DA), C to load to 3V , B with 1k to AO

[oxsanj1]

Thank you Henrik.