Labview connection for Yokogawa Oscilloscope

[chaoloh]

Hi,

I currently installed Labview 2013, VISA 14.0.1

I using ADLINK GPIB-USB connector.

In the VISA Interactive Control, it manage to detect the Yokogawa Oscilloscope with the correct GPIB ID. But when I run the example program supply by Yokogawa, the "VISA Recource Name" collumn there do not show the GPIB option in the list instead it show "COM 3, 5 ,6, 7,8, LPT 1". all these port is not assign for the GPIB-USB connector.

Kindly advise any other software/driver need to be install? or how can solve this issue.

Appreciate your help and advise.

Best regards,

Chao

[Dennis_Knutson]

One thing to try is to enable tulip support in the VISA properties. Your best bet is to contact adlink.