MIL-STD-1553 Astronics Ballard LabVIEW

[KevinBlankenheim]

Is there an example program in LabVIEW to configure my Astronics Ballard 1553 Module as a BC.  The BC operate at in a 4Hz loop and sends 1 Message containing 2 words to a RT (10) and requests the RT to return 1 message containing 19 words back to the BC?  Thanks for your time and help.

[_Bryan]

Did you check the manual/drivers link on the product page?  I did not want to create an account to check.

Towards the bottom of the page it says:

Software

• Universal BTIDriver API for C/C++, C#, VB, VB.Net, and LabVIEWTM

So I would imagine you could find something documented in the link.  If not, contact customer support and ask them.  Or someone else here will be able to help you out.

[raguprasadrao]

Hi, were you able to find a solution? I also need an example program for the exact scenario.

[KevinBlankenheim]

Sorry, I don't have access to LabVIEW anymore as I delivered the hardware/software to my customer.  I recall creating the xml file to create the messages and data rate of 4Hz for those messages.  Then, I used the Ballard BC functions to send and receive those messages.

[raguprasadrao]

Ok, Thank you.