multiple cases at a time

[GerdW]

Hi jeet,

---

@User002 wrote:

now i want to select  all three cases. If i select one case at a time its working and getting results as expected 

---

Did you read message #15 (carefully)?

Your VISA communication is a shared resource, it cannot handle several communications in parallel! So again: collect all commands in an array, then send them one after the other...

---

@User002 wrote:

Can someone explain me how to do like this in the link?

---

It's the same what we are telling you since more than a month: you cannot run several cases of a single case structure in parallel...

Do you even listen to our advise?

[User002]

Can you please give me example of it?? So i can understand better 

[User002]

For channel 1 voltage and current im doing the same then i need channel 2 and 3 voltage and current.. so im doing it in parallel.. 

[GerdW]

Hi jeet,

---

@User002 wrote:

For channel 1 voltage and current im doing the same then i need channel 2 and 3 voltage and current.. so im doing it in parallel.. 

---

Why do you insist on "doing in parallel" when you describe your requirement as sequential task (first A THEN B)???

Again: your VISA communication does not allow to send commands "in parallel", so send them in sequential order. Collect your commands in an array and send them one after the other...

[User002]

Scan is the 1st command then there 13 commands which are based on the register of chip to read and write values to register it has hex values those hex values are also can change the channel number. 05 is channel 1, 15 channel 2 and 25 channel 3.. 

2. Want to send commands for every measurement so when we send the command it will measure voltage and current of chip.

3. Response  of visa read are also hex values. Im using some formulas to convert into the values i want as you can see in sub vis the formulas. 

(We can adjust the current  and channel numbers using the commands 11 and 12)

[User002]

I need it universal. Like A, B, C at time as well

[crossrulz]

So what's wrong with the advice you were given in another thread from a week ago?