PC Data Acquisition & Sensors

[ITU? What is the question?]

I need a PC based Data Acquisition system with competible sensors for a 10 mili-second test.

Need to collect data under 10 miliseconds and I need pressure sensors, flowmeters and at least one load cell.

8 inputs (/outputs) should be enough but as tests develop we may need more like 25 inputs

Please let me know what kind of system I need.

osman akad

osakad@aol.com

cell in Turkey (533) 686-5958

[Tom_W_[DE]]

Hi Osman Akad-

If you will be using bridge-based pressure and load cell transducers you should probably consider an SCXI-based system.  This would require you to select a multifunction DAQ card (perhaps M Series), an SCXI chassis (SCXI-1000 or SCXI-1001) and some modules with which to excite your transducers and acquire their responses.  For load cells and pressure transducers, the SCXI-1520 would be an excellent choice.  Assuming your flowmeter will output a voltage proportional to flow rate, you should probably select an isolation amplifier SCXI module that would be well suited for general voltage input.  The SCXI-1125 would be a good choice for these input channels.

Of course you would also need cabling and breakout accessories for each of these modules.  I would encourage you to contact your local NI sales office so that you can discuss your application in more detail.

Hopefully this helps-