PXI-6534 Card using Traditional Legacy Card to DAQmx driver

[krispiekream]

I don't know where to start..I am stuck on an issue that needs to be solved.

I am using a Traditional legacy driver on a PXI-6534 Card.

 I want to move it to using the DAQmx driver.

Can someone point me to the right direction?

Thank you..

[Dennis_Knutson]

Start here

[krispiekream]

i read over the link you provided and i can see that changing it will take a while.

 some of the examples given didn't cover all the questions i have.

can you see my vi and see how would i change that to daqmx?

 

Message Edited by krispiekream on 02-24-2009 03:34 PM

[Dennis_Knutson]

That's done with the DAQmx Create Channel. You select the digital type that you want (write or read) and specify the channels.

[krispiekream]

i dont know if i am doing this right or wrong, but i am getting this ...

 

Message Edited by krispiekream on 02-24-2009 04:09 PM

[Dennis_Knutson]

The first thing to check is like the error message says and see if it is reservered by the traditional DAQ driver. Reet that and verify you can see the device in MAX with the test panels for DAQmx.