READ TIME TO LABVIEW FROM KSI TRPO-PCI BOARD

[wsmr_carmonar]

I HAVE A NEW SYSTEM WITH WINDOWS 2000, I BOUGHT A TIMMING CARD FROM KSI TPRO-PCI, HOW DO I READ TIME FROM THE BOARD REGISTERS IF I/O PORT IS NOT SUPPORTED ON WINDOWS 2000. BEFORE I COULD DO I/O FROM AN ISA TIMMING CARD ON WINDOWS 98.WHICH DRIVERS DO I NEED TO GET TO DO THE I/O

[codeman]

On windows NT and 2000, you need a kernel level driver to access these hardware registers. Take a look at this Knowledge Base:

http://exchange.ni.com/servlet/Redirect?id=1009247

At the bottom of this document is a link to port and memory utilities for windows called accesshw. You will need to download and install this.