Relay Set up using Cdaq 9174

[Walker87]

I am working on a project that requires the use of relays. I am using QM2N1-D24 relays.
http://www.automationdirect.com/static/specs/qmrelays.pdf

I have a Cdaq-9174, and a 9205 analog input as well as a 9263 analog output. I also have a 24V 5A DC power supply. I need to set up a circuit that will allow me to pragmatically open and close the relays. My analog output doesn't seem to be powerful enough to open the relays, so I feel like I'm missing a piece of the puzzle. Can anyone tell me how they would accomplish this task? 

(I need to use the relays to control  passing the 24V from the PS.)

[apok]

---

@Walker87 wrote:

My analog output doesn't seem to be powerful enough to open the relays, so I feel like I'm missing a piece of the puzzle. Can anyone tell me how they would accomplish this task? 

(I need to use the relays to control  passing the 24V from the PS.)

---

well, you are right in saying,"My analog output doesn't seem to be powerful enough to open the relays."...you need some sort of a driver for your relay use. That could be a TTL- ULN, Optocoupler, NPN, Fet,SSR and the list goes on....

here's an example using a USB6009 DigOut,12Vdc source and a TTL-ULN, but in your case...it should be a 24Vdc