Time Base Design for Tektronix RSA5103B using LABVIEW

[Miao]

Good Afternoon All

I am working for the VI design for time base using the Instrument Driver tkrsa6100 for the Tetronix 5103B Oscilloscope.

I did not find any direct example on that .

Relevant suggestion is highly appreciable.

Regards

Ayesha Zaman 

[Miao]

Good Afternoon All

I am working for the VI design for time base using the Instrument Driver tkrsa6100 for the Tetronix 5103B Oscilloscope.

I did not find any direct example on that .

Relevant suggestion is highly appreciable.

Regards

Ayesha Zaman 

Add tags

0 KUDOS

[Miao]

Good Afternoon All

I am working for the VI design for time base using the Instrument Driver tkrsa6100 for the Tetronix 5103B Oscilloscope.

I did not find any direct example on that .

Relevant suggestion is highly appreciable.

Regards

Ayesha Zaman 

[santo_13]

Are you trying to configure the timebase of your scope using LabVIEW?

Have you explored the VIs that come with the driver for your scope?

[mcduff]

---

@Miao wrote:

Good Afternoon All

I am working for the VI design for time base using the Instrument Driver tkrsa6100 for the Tetronix 5103B Oscilloscope.

I did not find any direct example on that .

Relevant suggestion is highly appreciable.

Regards

Ayesha Zaman 

---

What are you trying to do? The tkrsa6100 is a Real Time Spectrum Analyzer and the 5103B is an oscilloscope? Use the instrument driver for the scope not the spectrum analyzer.