USB-6009 pulse train generation with digital output....

[jolly jumper]

Hello!

I've bought a new USB NI-Card (USB-6009) and now I'm trying to adopt an old vi that uses traditional DAQ drivers. I wrote that vi for a PCI NI-Card (PCI-6024E), which has two counters to generate two pulse trains simultaneously. Now I've only one counter and that's why I'm searching for a good way to create pulse trains using a digital output! The pulse trains are both ranging between 100 Hz and 100 kHz.

I'm sure somebody has an idea how I can solve the probem in the best way 😉

Kind regards,
Peter

[jolly jumper]

Sorry, I forgot to mention that it hasn't to be a digital line. An analoge line is also okay!

[Dennis_Knutson]

You can't do it with this low cost board. Both digital and analog outputs are software timed only. The analog out is rated at only 150  samples/sec and the digital is about the same. You can't even use one of the counters because it is not a hardware timed counter output. It is an event counter only as an input.

[jolly jumper]

Hello Dennis!

Thank you very much for your quick response. I'm sorry that it's not possible 😕

Kind regards
Peter