Using USB-6008 to light up LED array(hardware)

[Flibbertygibbet]

I've created the coding to light up an array of LEDs at random, can someone teach me how to light up my hardware using the NI-USB6008 exactly as it lights up in the VI? thanks.

p.s: I've attached my VI and LED array schematic

[smercurio_fc]

Have you taken a look at the documentation? Page 21, to be specific. The USB-6008 digital lines are open-collector. This means you have to wire them up to sink current, meaning you will need an external power supply.

[Flibbertygibbet]

may I know how to do that? I'm fairly new to electronics and LABView.. thanks.

[Henrik_Volkers]

Maybe it's wise to protect your outputs with some drivers :some I found , but they might not be the best suited... (they should be cheap (<.5$) and on Stock >1k at digikey just to give you an idea...

74as1034

74 11240

But since you want to start with electronics 

read Horowitz/Hill: The art of electronics (library?)

Now build your custom discrete transistor drivers...  

[Coq_Rouge]

You can also get LEDs that only draw 2mA. They are not so bright, but then you do not have to use a driver only a resistor

Which country do live in. I you live in Europe I might give you a vendor

I know Agilent has such a series of LED