Vision Assistant Crashes Vision Builder

[jamescoady91]

Hi All,

I`m new to this forum so was unsure where exactly to post this so I took a gamble and selected here.

I have LabVIEW 2018, NI Vision Builder and Vision Assistant 2018.

Whenever I acquire an image in vision builder and then select the tab to edit this image in vision assistant, vision builder crashes and I get this error report attached.

I have completed numerous searches and have found discussion forums relating to this but cannot seem to get it sorted.

Any help greatly appreciated 

[Bob_Schor]

You could try posting in the Machine Vision forum (listed under Most Active Hardware).  It would help to post more than a picture of an Error message -- perhaps code if you have it, or a detailed description of what you are attempting to do.

Bob Schor

[thuyanhl · Accepted solution]

Hi James,

This is a known issue in VBAI 2018. Refer to this KB for a fix: https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000019ZZDSA2&l=en-US

This fix will be included in VBAI 2018 SP1 which will be released at NIWeek 2019. 

Let me know if you have additional questions.

Thanks

[jamescoady91]

This worked perfectly thank you very much for your help! 🙂