cypress firmware through NI-VISA?

[Josv]

Hi,

Are there possible to load a cypress firmware(a *.bin file) through NI-VISA?

Thanks!

[AshwaniS]

Hello Josv!

Yhe answer to your question is yes. I´m attaching the LV code to show how it can be done.

cheers.

[Josv]

Nice program,

But I can not gett it to work... I get following error message:

"Error -1073807302 occurred at VISA Write From File in visa.vi"

Any more rekomendations?

Thanks

JoSv

[AshwaniS]

Hi Josv,

Try this one.

-

[Josv]

Thanks for helping me...

I think the real issue lays in the cypress-chip that Im working with.

It’s supposes to get a reset-signal (consists of several codes) 

before it can start to load its firmware.

But I don't know how I able to send "reset" down from Labview.

Hope to hear some good news next time to...

/JoSv

[AshwaniS]

Hi Josv!

Start a new thread with the cypress-chip reset-signal issue and I´ll see what I can do about it.

And while you´re writing it down, complete it with the type of communication device you are using to communicate with the chip.

cheers

[Josv]

Here: http://forums.ni.com/ni/board/message?board.id=170&message.id=144006

[Josv]

Hi!

The firmware that Im using is a *.hex file or a *.bix file is it possible to read them in Labview?

Thanks

Jonny