dos driver for lab-pc-1200-ai card

[Jon Juhlin]

Are there drivers available for the N.I. lab-pc-1200-ai ISA data aquisition
card that will allow the card to used in a dos environment?

This is for a hobby project using an IBM-AT and MS-DOS operating system.
Programming will be done using C at the register level.

[Sarah Thompson]

Since the board you mentioned was never supported on DOS by NI-DAQ, you will have to use the Measurement Hardware Driver Development Kit. Please refer to the following product page for more information: http://sine.ni.com/apps/we/nioc.vp?cid=11737〈=US. Good luck with your hobby project. You'll definitely learn a lot!