no visa-connect via ethernet

[iwl]

Hi,

I cant connect to a ethernet connected device with labview, max don´t
find the device (network neighborhood) while tekvisa (tektronics) from
another computer find the device, the ip-connection is up (ping),
switched off xp firewall too tekvisa worked with. max/labview on the
second computer (tekvisa) also dont find it. on the first computer
there is only labview with the ni visa drivers

Any tips welcome

ingo

[MXI Master]

iwl,

Does your device comply with  the VXI-11 LAN specification? That could be the reason it is not finding it, but you can still communicate with it if you know what port your device is on. Here is a Knowledge Base Article that will walk you through recognizing your instrument in MAX.

Knowledge Base: How do I Configure  an Instrument to Communicate Via TCP/IP in MAX?

Cheers,

[Veeru]

Hi Good morning

I have the same issue,setting up a communication in MAX.

I am trying to communicate via Ethernet with PM6000 power analyser.I have the problem with VXI-11 LAN setup. Also i tried to enter manually the IP address and in the LAN device field i entered the device name but got the error message.

Please give me suggestions on how to setup the Ethernet communication for this Power analyser.

Thanks

[shblx]

Hi Veeru,

Have you solved your problems? I have same issue as yours. I tried to control Voltecg PM6000. via ethernet. If yes, would you please let me know the solution?

Thanks in advance. 

[Mathan]

Posted also in Instrument Control board.