pls help me in sending sequential responses for the different commands.

[nitin_bangalore]

Hi all

pls help me in  sending sequential responses for the different commands. For example,i have to send the response1 for command1 then again host wll send the some other command ,say command 2  after receiving response 1,then again i have to respond to the corresponding command.i m using the pci-6221 card not tradition DAQcard.

regards,

nitin

[Dai]

Hi,

you need to be more specific. What is your setup?

Obviously, what you need is a command parser. Look this article for the basics. I know it is meant for RT but the concept is there.

Not sure it will help with so few infos: http://zone.ni.com/devzone/conceptd.nsf/webmain/CD63FD0F746B17A686256F090065F572

Dai

[nitin_bangalore]

i want to make my memory card to communicate with host(mobile phone) via SPI. TO MAKE SO i hv to send various repose to the sequential commands of the phone ,which ensure that my card is recognised properly by host. if possible pls send me the basic skelton regadig same.

regards

 nitin

[nitin_bangalore]

i want to make my memory card to communicate with host(mobile phone) via SPI. TO MAKE SO i hv to send various repose to the sequential commands of the phone ,which ensure that my card is recognised properly by host. if possible pls send me the basic skelton regadig same.

regards

 nitin