The Tek scope can send you a hardcopy, very similar to any other query. Use
IBRDF to capture the repsonse to a file.
Another possibilty, if you don't want to write any code, is a Tek model AD007
GPIB to 10baseT adapter. This gadget has smarts so you can set it up using a
web browser on the network, and tell it the ip address or network name of a
printer. Then when you press the hardcopy button, it sends the print out to the
printer.
Send email to support@tek.com or visit www.tek.com for more info.
good luck,
Mike T
Mike Anderson wrote:
> I may be in the wrong newsgroup for this question - if I am, I apologize.
>
> We have an HP logic analyzer and a Tek 'scope that both have a GPIB
> interface and a 'print' button. Does anybody know of anything I
can hang on
> the GPIB bus to capture the 'print' requests? I need the hardcopy printouts
> so I can document the hardware and show the software guys how things work.
>
> Any leads are appreciated,
> Mike
--
Best Regards,
Mike T
Mike Tranchemontagne
Consulting Applications Engineer
TeraComm, Inc.
148 Main Street
Building A, 3rd Floor
North Andover, MA 01845
877-900-TERA (8372)
978-557-9490 (FAX)
603-598-4773 (Direct Line and Cell)
