Matrixx Gui "uiWindow" height limitation

[BT_canadair]

Running MX 7.1.4 on Windows 2000.

I have a GUI that has a main uiWindow and 3 main sub panels (there are also multiple panels within the main panels).
Layout approximately:
______________________________________________
| |
| Main Panel 1 |
| |
|---------------------------------------------|
| Main Panel 2 | Main |
| | Panel 3|
| *numerous sub panels* | |
|------------------------------------| |
| | |
|------------------------------------| |
| | |
|------------------------------------| |
| | |
|------------------------------------| |
...etc

My problem is that even with the GUI at full screen size (on a 21" monitor) the sub panels extend below the viewable area.
I have tried increasing the size of the MainWin (which is type "scrolled") but this appears to be limited to full screen height? I have also tried increasing the size of the Main Panel 2, but that has no effect either.

FYI, the height increase and extended scrolling work fine running on Solaris.

1- Is the height of the GUI limited.
2- Should I be able to scroll if the defined GUI object size is larger then the viewable area?
3- Why does the GUI object behave differently on Windows vs Solaris

thanks

[BT_canadair]

Sorry about the layout.
The posted message appears to have removed the added spaces.

Basically you have 3 main panel: 1 across the top and 2 columns
The left side column has many rows of panels.

Cheers

[Ricardo_SR]

Hello,

It is a little difficult to understand what you want and what the problem is. Could you attach a sample script that will demonstrate what the problem is?
Thank you

Ricardo S.
National Instruments

[Ricardo_SR]

Hello,

The problem is that it is missing the visibility keyword when defining the MainWindow through the uiWindow command. Adding this keyword solves the problem.

Ricardo S.
National Instruments