Vision Builder AI changing the "job" and start/stop inspection with NI-DAQmx URGENT

[Bostjan_1234]

Dear users and support

I have a simple inspection with 3 different object. For now I have also 3 inspections for this objects.

My question is how can I chose with NI-DAQmx witch object to control(to load the right inspectio) and how can I start stop inspectio with digital input also conected on NI-DAQmx

Thank you for help

regards

Bostjan

[toto69]

Hi,

Use the "select inspection" function as described here: https://decibel.ni.com/content/docs/DOC-16603

To use a physical channel as a selector, have a look here: http://digital.ni.com/public.nsf/allkb/33364C17A30E3268862570890079DBD6?OpenDocument

Hope this helps

Regards

[Zody]

Hi,

What type of cameras are you usign with VBAI? If you use Smart Cameras, you can use one of the digital I/O to trigger and choose what inspection to run.

Best regards,

I.R.