07-13-2005 05:50 AM
07-14-2005 02:56 AM
Hi,
The way typically used to make an autofocus procedure and the simplest too is trace a line profile along a side of the object under FOV and control the Std Deviation parameter coming back from the line profile procedure. Higher is the Std Deviatin parameter and more close is the focus to the right value viceversa lower is the Std Deviation and far off is the focus to the right value.
Hope usefull
Best regard
07-14-2005 03:27 AM
thanks a lot
best regards
fulvio coppola