install the driver of IEEE-1394 (Firewire) camera

[Sadok]

Hi,

I ve developped a vision application on VBAI. After that I migrated it to LabVIEW.

The problem that The application is not repetetive. After some times, It returns an error. To solve this problem I reinstall the driver of the camera from max. Why this happen? and what shall i do?

[Brad]

What is the error? You can turn on highlight execution to see where the error is coming from and track it down to the specific step throwing the error. This would be helpful information.

Thanks,

Brad

[muks]

---

To solve this problem I reinstall the driver of the camera from max.

---

After re-installing the error is not occuring?

[Sadok]

yes. After installing the cam the vi execute correctly. After some time I need to reinstall the cam although I didn't touch the cam neither the cable. 

[Sadok]

It an error related to acquisition

[wbadry]

Do you use any registry cleaner utilities? As this utilitiy may remove your driver. Also check if you use a decent antivirus.

[JeffL]

What exactly do you mean by reinstall the driver from MAX? Is this a real-time target? Or are you just reselecting the driver in MAX?

[Sadok]

I just reselect the driver

[JeffL]

It sounds like you were using the old 1394 driver at first, then started using IMAQdx in LabVIEW. Once you select the right driver it'll work.