Programming PCI-6602 in visual basic 6.0

[joe shmo]

i have a pci 6602 counter timer board and would like to write the program in visual basic 6.0.  Can someone point me in the direction of were i can get thorough information on how to set up the interanl clock source of 80MHz and then get the times from the Gate lines that are aquiring external stop pulses.

[Abhinav T]

Hi Joe,

Please refer to the following document for DAQmx VB6 support.

NI-DAQmx Support in Visual Basic 6.0

 If you have installed support for Visual Basic 6.0 when installing NI-DAQmx you should see examples in the NI-DAQ folder as shown in the KnowledgeBase article above.

Abhinav T.
Applications Engineer
National Instruments