How to make the right characteristic in an Active-X CWCounter-Control for a AT-MIO-16-E2

[SMN]

Jason thanks a lot for your help last time.
I work with measurement studio 6.0, NI-DAQ 6.9 and a AT-MIO-16-E2. My problem is to configure the characteristic from the CWCounter-control so that I can measure the frequency of an incoming pulse-signal on PFI9. Hope that somebody can help me to fix that problem. Maybe the problem can also be in the configure of the Measurement and Automation Explorer.
Can somebody tell me, how to configure it right?

[bman]

SMN

You should be able to set the CWCounter control using the property page. Set the Measurement Type to Frequency and the counter to 0.

Then have your unknown signal go into PFI9, gate of counter 0.

If this is what you are doing and it is not working, let me know some more info on what it is doing. (i.e. not getting any frequency, wrong freq, etc...)

Brian