Need guide on how to design LabVIEW layout for displaying an output from Kelly Controller to control the CompactRio

[kienyang90]

Hi guys. Do need some help here.

My task is to design a LabVIEW design shematic to display the regeneration current drawn from the BLDC motor through Kelly Controller with an output voltage range of 0-5V. The Kelly Controller is to communicate with the CompactRio. However, I do not know how to start it and I'm kinda new to LabVIEW.

Really appreciate any kind help and guide that can progress me ahead. Thanks.

[TuiTui]

Hi kienyang90,

CompactRio guide can be found in NI website via this link http://www.ni.com/pdf/products/us/fullcriodevguide.pdf 

By reading the guide, you will get an idea on how it works.

To connect compactRio with external module or sensor, you need an i/o module.

for example an analog input module is this one https://www.ni.com/en-us/shop/model/ni-9201.html

You have to pick modules depend on what kind of output source you are going to give to the compactRio

Hope this help

TuiTui