AMUX-64T and MAX

[TheFish]

Hi!

I have several applications I developed in LabWindows/CVI for NT/2000/XP.  They've worked fine until recently.

My last XP computer has been replaced, and I can't get the anything to work with Win7 and TradDAQ7.5.

I have two PCI cards, 6034E connected to an AMUX-64T, and a 6052E connected to a BNC2090.

MAX lets me set everything up correctly, but my readings are garbage.

I'm not sure what to do at this point.

Carl

[Libbin_la_vida_loca]

Hey TheFish,

Using Traditional DAQ with a modern system can be tricky. Only the 32 bit version of Windows 7 is supported in tDAQ.

https://www.ni.com/en/support/documentation/compatibility/22/traditional-ni-daq--legacy--windows-vis...

If you are using a 64-bit machine, I suggest transitioning your code to the NI-DAQmx driver which still supports the PCI cards that you are using. The following guides outline some of the major differences between tDAQ and DAQmx.

https://www.ni.com/en/support/documentation/supplemental/06/transition-from-traditional-ni-daq--lega...

http://digital.ni.com/public.nsf/websearch/7759B0D2A8A392DF86256D21001B452E