Advise me the DAQ PCI card for DOS mode

[Anton_P]

Ok, Could you advise me another PCI acquisition card? My task is read two DC signals, one from B-type thermocouple (mV range) and another one from ATA-2001 amplifier (+/- 10V range) with high precision (16-bit). I want to use my old program, which was wrote by Turbo PASCAL for Dos. These signals should be read simultaneously with the frequency around 1-2 kHz.

Anton.

[Erin_B.]

Hi Anton,

There are no PCI DAQ boards that are supported by the last version of NI-DAQ to support DOS, 4.8.0. To find a list of the boards that were supported by this version, you can refer to Chapter 2 of the user manual:
http://digital.ni.com/manuals.nsf/websearch/779911CF7E0FEC618625665E0063595A?OpenDocument&node=132100_US
Unfortunately, most of these boards are now obsolete and all are ISA.
I would highly recommend upgrading your software to work in a Windows environment.

Regards,
Erin