Cross talk in BNC 2090

[kyfish_dr]

Thanks for the information provided. I followed your advice by connecting
DGND1 with a wire to USER1 and DGND2 to USER2. But I still get cross talk.
It also puzzles with a fact that when I connect a signal source (from a
functional generator) to ACH1 but in fact the signals show up on the
Biobench screen as ACH0 as defined. So my hunch is that something wrong
happens to BNC 2090 or the PCI-MIO-16XE-50 board installed in the computer.

Would it be possible for me to send in the BNC2090 for a check? If so, what
are the procedures to follow.

[Sarah Thompson]

We handle all repair requests over the phone. The procedure is as follows:
1. Go to www.ni.com/ask to create your own Service Request number (SR#). Choose the Phone NI option. Fill in the form with the appropriate information.
2. Call the support number that is given to you and enter in your SR#. You will be directed to an Applications Engineer (AE) that will assist you through the process. The AE will be able to answer any questions you may have about the repair process.

Have a great day.