Multifunction DAQ
Data acquisition ( current measurement )
Hi ,
I am working on LabVIEW 2015 project, i have in my test specification a need of measuring of the output current of the product with an average of 10 ms time window, that means in 10 ms I should have an N simple and there average ,
1- I created my task in NI max , but i don't know which are the best configuration for this test and how i can used with labview :
2- i have 7 Ni chassis cDAQ-9184 with the same configuration ( Ni xnet + Ni ni9227 )
the software must be compatible with all the chassis without any modification in the Ni max but there is a difference of the address Mac on those chassis , I tried to change the name of address mac but it doesn't work correctly, have you an idea about this please,
Thank you ,
@Revo2018 wrote:
1- I created my task in NI max , but i don't know which are the best configuration for this test and how i can used with labview
You probably need to constantly read the data. So I would use Continuous Sampling, 1kHz, 10 samples. (10 Samples)/(1kHz) = 10ms of data. You can then do a simple average on the read data.
@Revo2018 wrote:
2- i have 7 Ni chassis cDAQ-9184 with the same configuration ( Ni xnet + Ni ni9227 )
the software must be compatible with all the chassis without any modification in the Ni max but there is a difference of the address Mac on those chassis , I tried to change the name of address mac but it doesn't work correctly, have you an idea about this please,
MAC addresses are fixed my the Ethernet adapter. What you care about are the IP addresses.
