Does SignalExpress support USB-9211/15 & USB-6015/16 ?

[multiscan]

Does SignalExpress support USB-9211/15 & USB-6015/16 ?

[LucaP.]

Hi gsa,

Here is a list of hardware which is supported:
- NI M Series and E Series DAQ (DAQmx only)
- NI High-Speed Digitizers
- NI Signal Generators
- NI Dynamic Signal Acquisition (DSA)
- NI Analog Output
- Third-party devices (*Requires downloading or creating a LabVIEW based user-defined step)

You see, that you must program a LV based user-defined step in SignalExpress if you want to use the USB boards.

Regards,
Luca

[Richard McDonell]

Actually, SignalExpress does work with the USB-6015/16. I have not personally tried it with the 9211/15 though. In general it works with any DAQmx compliant device (excluding DAQmx Base).

[gus]

The USB-9211/15 are currently only supported under DAQmx Base, so in order to use these devices with Signal Express, you would have to create a user defined step, as Luca mentioned.

I hope this helps!
gus....