I am working with a Fluke Hydra 2625 data logger, have downloaded the NI LabVIEW drivers, ran through the config., initialize and set modes files, and am now trying to read the data for a thermocouple. Initially, I was getting an error message ("17" I think) but now, after correcting the port numbers, the data logger and LabVIEW seem to be communicating without error. I would like to know where I should look (within the front panels of the various drivers) for the temperature data output. Any advice would be appreciated at this point. Thanks.

There is an unsupported driver here. I don't have the instrument and haven't used one in quite a few years but if using the example, the function can be set for temperature with thermocouple or temperature with 751 RTD. The results will be in the min/max/last indicators. The driver could really benefit from a whole rewrite but it looks like most of the basic functions are there.

Multifunction DAQ

Fluke Hydra 2625 with NI LabVIEW drivers: cannot read data ouput

Solved!

You are going to have to address the problem of multiple channels. You simply cannot have two separate loops querying the same instrument at the same time.

Message 11 of 11

(907 Views)

Multifunction DAQ

Fluke Hydra 2625 with NI LabVIEW drivers: cannot read data ouput

Re: Fluke Hydra 2625 with NI LabVIEW drivers: cannot read data ouput