PCI 6143 card not seen in MAX

[eesen]

Hello,

I have a RT target. I ınstall PCI 6143 card on it. I can not seen card on MAX..

(I ınsall drivers by using MAX to RT target.)

What can be the problem

Message Edited by eesen on 01-16-2007 08:17 AM

[Jimmie_A.]

Hello!

If all SW needed is installed on the target it is most likely due to a corrupt file (during a power cycle for an example) and you can find information on how to fix such issues here (see problem 2):

http://forums.ni.com/ni/board/message?board.id=270&message.id=1520&requireLogin=False

When all SW I refer to the following: LabVIEW Real-Time, NI-VISA Server, NI-VISA and NI DAQmx.

[eesen]

I thougt that I installed all drivers but ı missed one. When ı install it I can see my PCI 6143 card in the devices and interfaces list. Then installed PCI 6289 card on my RT target. I can see PCI 6143 card in the devices and interfaces list but i can not see PCI 6289.  I trie to reinstall drivers but not work. 

Why I can see PCI 6143 but not PCI 6289?

[Jimmie_A.]

Hello!

Make sure that the DAQmx driver support the board(s) in question and you can find this information in the read-me file that is installed with the driver. Also you say that you have PCI boards and a RT-target so in other words you use a desktop as a target. What kind of specifications do you have on the PCI bus in that computer?

Look at this link:

http://digital.ni.com/public.nsf/websearch/677E9DEF848CD2A386256F160074C97B?OpenDocument