unable to detect Lab Pc 1200 in max 3.0

[Water]

I am currently trying to install a legacy NI DAQ card
Lab PC 1200 onto a Windows 98 machine. I believe this is a plug and play card as the windows operating system is detecting it everytime I boot up the machine. THe windows keep on prompting me for the driver.

From the NI website, I have obtained NI DAQ 7.0 installation. I have installed it but I still could not find any such devices under the device settings. I have try refreshing the list a few times by clicking view/refresh. However, there is still no such device

Currently, I have only installed the NI DAQ 7.0. I do not have any other NI software product like Labview. Will this affect the card installation? I have attached the MAX 3.0 configuration pix

[JustinBritten]

In the NI-DAQ 7.0 Readme file you will find that the Lab PC 1200 is no longer supported by the NI-DAQ driver. This is one of our legacy devices as will not be ported to our new driver.

If you wish to use this board, you will have to install version 6.9.3, or previous, of the NI-DAQ driver. You can find version 6.9.3 on our website at http://www.ni.com by clicking on Download Software or by using the following link directly.

http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C1293?opendocument

Regards,
Justin Britten

Applications Engineer
National Instruments