usb 6009

[cadiz1]

Hi  have  seen the  videos   Continuous Waveform Acquisition  using  usb 6211  generating and  acquiring   a signal on analog in and out .  I am unable  to  do the same using the 6009.  I suspect the  6009 cannot generate  waveforms . Am I  correct?

Thanks

[George_Cs]

Hi, 

USB-6009 can generate waveforms, but only in static software-timed (DAQmx_Val_OnDemand) mode.
Output voltage range is 0 - 5V; max. update rate is 150 Hz (very slow).

See the specification:
https://www.ni.com/docs/en-US/bundle/usb-6009-specs/page/specs.html

- George -

[cadiz1]

Thanks  for your help . I will keep working on it