I'm using Multisim/Ultiboard 11. I get this error consistently in version 11. I change or add components to my schematic and use the rename/renumber component tool. I already started a PCB layout so I will then Forward annotate to Ultiboard 11. In ultiboard 11 I get a list of design errors stating pins are missing from component shapes connected to a specified net. i.e. Ultiboard - Thursday, February 04, 2010, 10:36:29 AMForward annotation [PLSM3750] - Thursday, February 04, 2010, 10:36:46 AMForward annotation completed; 0 error(s), 0 warning(s); Time: 0:00.19DRC and Netlist Check [PLSM3750] - Thursday, February 04, 2010, 10:36:53 AM Design Rule Error: Net 2 connected to Net LTSRC Pin "+" from part "C6"(2.2µF) in net "555RC" is missing from shape "32mmPolyFilm" Pin "-" from part "C6"(2.2µF) in net "0" is missing from shape "32mmPolyFilm" Pin "1" from part "C6"(2.2µF) in net "0" is missing from shape "32mmPolyFilm" Pin "1" from part "J2"(180Pin) in net "0" is missing from shape "180PIN" Pin "1" from part "R4"(4.12kΩ) in net "555VCC" is missing from shape "RESC1608X63N" Pin "2" from part "C6"(2.2µF) in net "LTVT" is missing from shape "32mmPolyFilm" Pin "2" from part "R4"(4.12kΩ) in net "555DIS" is missing from shape "RESC1608X63N"DRC and Netlist Check completed; 8 error(s), 0 warning(s), 0 filtered error(s); Time: 0:00.01 The problem is for example that the part 32mmPolyFilm is not, nor ever was connected to net 555RC and the same goes for all the other flagged errors. Is this a SW bug right now or did something change in how your supposed to forward a new net list? thanksRyan

Multisim and Ultiboard

error in Ultiboard 11 forward annotate

I know about this workaround; however, this process should be done by the computer program itself to ensure it happens every time, not by the end user.

Message 11 of 11

(760 Views)

Multisim and Ultiboard

error in Ultiboard 11 forward annotate

Re: error in Ultiboard 11 forward annotate