using prescaler in Multisim10

[yalect]

Hello, I would like to ask you if I can using prescalers in Mulisim10, I have prescaler U664 or there is possibility to download the model and add it? thank you

[Rscd27]

Hello yalect,

If you have the SPICE model you can always create a new component using this documents as guide:

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000YH5fCAG&l=en-US

In this document a list of all components of Multisim depending of the version:

http://www.ni.com/white-paper/5607/en/ 

If the component is not present in Multisim database version you will need to create it.

Regards,

[yalect]

Hello, really, I didn't find my component Prescaler U664 but may you can help me to creat one basing on the Datasheet Thank you

[Rscd27]

Hello Yalect,

I believe the tutorial is pretty straight foward and easy to follow. If you have any question about a part of it I will try to answer your questions, but you will have to create the component yourself. You will need the SPICE code and that is usually obtained from the component manufacturer